The hitch part # 76143 by itself has a tongue weight capacity of 750 lbs and trailer capacity of 5,000 lbs. If your 2017 Tesla Model X had a lower towing capacity you would be limited to the lowest capacity of the setup. The hitch manufacturers design their hitches and then rate them for capacities separately from the vehicle.
This hitch is also not rated for weight distribution.
If your trailer weighed 4,800 lbs it would be 200 lbs underneath the capacity of the hitch so it would work well. view full answer...
We can get you a great cargo carrier for your 2017 Tesla Model X that is lightweight so your pup has enough room to enjoy the ride with you; that's a pretty big dog so they need all the room they can get!
What I highly recommend is the Curt Cargo Carrier for 2" Hitches # C18113 because at just 25 lbs it is the lightest carrier available, giving you 95 lbs of capacity. so you can transport your gear. This carrier does come with a pin and clip though I recommend adding the Anti-Rattle Trailer... view full answer...
We have a hitch that fits your 2018 Tesla Model S with the EcoHitch part # 306-X7201 but the hitch you referenced does not fit your vehicle. view full answer...
We have the perfect option for you and your Tesla Model X and it is a very straight forward easy solution too. Since you do not already have a hitch installed on your 2017 Tesla Model X, I suggest the SeaSucker Ski and Snowboard Carrier, # 298-SK2425.
This vacuum cup mounted carrier is for 4 Pairs of Skis or 2 Boards. It attaches with (4) 6" vacuum cups with a pull strength rating of 210 lbs. per vacuum cup, so it is easy to move to another vehicle if you want or to simply put away... view full answer...
The best solution for you to carry 2 kayaks on the roof of your 2021 Tesla Model X is going to be to use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. This roof rack will use thermoplastic vacuum cups to attach to the roof of your Tesla and has a weight capacity of 150 lbs. You will then use the Malone FoldAway-5 Kayak, SUP, and Canoe Carrier # MAL38FR to attach to the roof rack and can carry up to 2 kayaks weighing up to 75 lbs. each. You can use the SeaSucker Cable Anchor for Cable... view full answer...
A good choice for your Tesla is the SeaSucker # SK2420 carriers that hold 8 skis or 4 snowboards, and can easily move from one vehicle to another. view full answer...
On the Buyers Products ball mount part # 3371803210 that you referenced the distance from the center of the hitch pin hole to the center of the hitch ball hole measures 8 inches. view full answer...
The Yakima HoldUp 4 Bike Platform Rack - 2" Hitches - Tilting - Wheel Mount # Y02443-2 will work with your 3 electric bikes that are 50 lbs each. This bike carrier is 50 lbs per bike so it will work well and is my recommendation for you. This rack both tilts for cargo access and folds for storage. view full answer...
The really great thing about the Curt Echo Mobile brake controller part # C51180 that you referenced is that it can basically fit any vehicle that has a working 7-way. So it would work great for your 2018 Tesla Model X since it has a functioning 7-way! view full answer...
Draw-Tite trailer hitch # 76143 is an excellent option for a bike rack and your 2018 Tesla Model X. The hitch has a 2 inch receiver so it will be compatible with your bike rack. I have included a link to the installation instructions for you. view full answer...
The Draw Tite hitch part # 76143 has a tongue weight/vertical load capacity of 750 lbs. That's quite a bit more capacity than what you mentioned the OEM would have. view full answer...
I have some info that can help, see below:
**Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76143.
When it comes to vertical weight and tongue weight, those two terms mean the same thing in regards to hitch receivers.
The Draw-Tite linked above has a max tongue weight of 750 pounds and a max trailer weight of 5,000 pounds.
Simply put you can have up to 750 pounds pushing down on the ball of the hitch receiver while it pulls a 5,000 pound trailer.
If you want... view full answer...
We have all you need right here, you can see the items that fit your model X below:
**Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76143.
*ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT.
The 2016 Tesla Model X can tow up to 5,000 pounds unless it has the optional 22 inch wheels, if you have those your towing capacity will be reduced to 3,500 pounds. The Draw-tite hitch has a max trailer weight... view full answer...
The SeaSucker Monkey Bars Roof Rack # 298-SX6000B is still the best and only option for installing a roof rack on your 2020 Tesla Model X. All the information from Heather in the question you asked from is still relevant for your vehicle. Like using the cable lock part # e98891 and the SeaSucker Cable Anchor part # 298-BA0020 to keep everything secured.
One other thing I would say differently is my recommendation of a kayak carrier. For a J-style carrier that can also be used as a post-style... view full answer...
The only cargo carrier that can be used safely with the Hollywood Racks Sport Rider SE 4 Bike Rack w/ Cargo Carrier - 2 Fat Bikes # HR1400Z-85-FB that you referenced is the one that is included with this kit. Other carriers might fit the rack setup but the extra weight and leverage of a longer/heavier carrier would potentially damage the bike rack as well as your hitch since that's quite a bit more stress on everything. view full answer...
For a roof rack that will fit your 2021 Tesla Model X you need the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B. This rack uses vacuum cups to secure to the roof of our EV. It features aluminum round crossbars and a customizable crossbar spread to carry different gear. The nice thing about this roof rack is that it can be removed and stored when not in use.
I have attached a review video for your reference. view full answer...
Aftermarket trailer hitches will typically have higher towing capacities than the vehicles they fit. Reason being is that they design the hitch to fit the vehicle, make it as strong as they can, and then independently test the hitch from the vehicle for capacity. So what this means is that you are still limited by the capacity of the vehicle even when using a hitch with a higher weight capacity. Basically what would happen is the vehicle frame would fail before the hitch which is why you... view full answer...
Yes, this is just what you need. Hollywood Racks makes this rack specifically for the heavier E-bikes like your RadRovers with the part # HLY84FR which has an 80 lb per bike capacity and has wider wheel hoops to allow fat bikes up to 5" wide to fit too right out of the box. This will work with a 2" hitch. If you happen to have a 1-1/4" hitch, then you could go with the HLY74FR instead. view full answer...
Yes, as long as you have a hitch on your 2022 Tesla Model X like the Draw Tite part # 76143 the Thule EasyFold XT part # TH903202 would fit and work well. view full answer...
Go To Results